Pegfinity - Magnetic Socket Racks
Print Profile(1)
Description
This is a alternative to my standard socket racks. Printed in basic PETG for durability. They use press in magnets instead of the 3d printed socket tabs. This is a much better alternative since these tabs can break off in the 3d printed layer directions. Plus the magnets allow for any orientation of the sockets, allowing for a quicker return of the socket to the rack. If you print everything, there will be quite a few magnets needed. Almost all of them are 10mm x 3mm in size. The rest are 8mm x 3mm. I HIGHLY RECOMMEND GETTING N52 GRADE MAGNETS. There will be quite a bit stronger and hold the sockets the best. Here is the breakdown.
10mm x 3mm TOTAL =101
8mm x 3mm TOTAL = 25
All Metric racks (Standard and Deep) are 10 x 3 = 55
All Standard SAE are 10 x 3 = 30
The SAE Deep 3/8 drive are all 10 x 3 = 9
The SAE Deep ¼ has five 8 x 3 and five 10 x 3
Check out the rest of The Pegfinity System!
Clips
https://makerworld.com/en/models/754780-pegfinity-just-clips#profileId-688871
Angled Wrench Holders
Paper Towel Holder
https://makerworld.com/en/models/752909#profileId-686843
Bins and Cubbies
https://makerworld.com/en/models/749423#profileId-682912
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)