Linear Stage
Print Profile(1)
Description
This is a linear slide stage for a 42 stepper motor with a stroke of approximately 60mm For a longer stroke, a longer base needs to be printed, equipped with longer linear guides and a lead screw
----------
BOM
| Item No | Description | Quantity |
| 1 | 608ZZ bearing | 2 |
| 2 | Flexible coupling 5*8 | 1 |
| 3 | MGN9 linear guide 100mm | 2 |
| 4 | MGN9H extended slider 39.9mm*20mm*8mm (L*W*H) | 2 |
| 5 | T8 lead screw 132mm + lead screw flange nut | 1 |
| 6 | M3*18 flat head self-tapping screw | 6 |
| 7 | M3 nut | 18 |
| 8 | M3*8 hex socket head cap screw | 6 |
| 9 | M3*12 hex socket head cap screw | 12 |
| 10 | M3*25 hex socket head cap screw | 8 |
| 11 | M3*30 hex socket head cap screw | 4 |
Printing Requirements
Set a pause at layer 125, then resume printing after inserting 4 M3 nuts into the slide block of the stage
Installation Steps
Insert M3 nuts into the printed slide nuts, a total of 14 sets are needed
Use 10 M3*8 bolts to mount the linear guides on the 2060 profile, and use 4 M3*12 bolts to mount the lead screw bracket on the 2060 profile Do not tighten all bolts yet
Prepare the slider shims
Secure the lead screw flange to the slide block with 4 M3*30 screws
Carefully mount the guide slider onto the guide rail, then fix the slide block to the linear guide's slider with 8 M3*25 bolts
Screw in the lead screw and install the flexible coupling
Secure the 42 stepper motor with 4 M3*12 bolts
Fix the two end plates to the 2060 profile with 6 M3*18 self-tapping screws, and screw 4 M3*12 bolts into the slider to fix other workpieces
Finally, adjust the positions of the linear guides and lead screw bracket to ensure smooth movement of the slider, then tighten the nuts securing the linear guides and lead screw bracket
End
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)