AD5X Enclosure Power Remix

This is my first attempt at creating/remixing so please be patient as I learn and update these.

C4 Remix of Flashforge's enclosure kit. This part contains ports for the C13 and C14 power outlets. I used a C13-C14 extension cord to connect from the new C13 to the AD5X power jack. 

D4 Remix of Flashforge's enclosure kit. I've added a new power switch, a hygrometer, and fan relay.

I added channels to both C4 and D4 to route the wires for the fan and outlets. I used 20awg to wire the fan/relay and 14awg for the outlets and front mounted switch.

I don't have the file at the moment (laptop fried, currently working to restore everything) for the fan mount but it was a remix of Flashforge AD5X Top Mount IFS by Ragnarok84 - Thingiverse

All parts printed on a Flashforge AD5X. The orientation on the build plates is to minimize supports within the cable channels.

Part Links:

Flashforge original enclosure kit printable parts Files For Printed Parts | Flashforge Wiki

Flashforge original enclosure kit https://www.amazon.com/dp/B0GC656HHD?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_131

C13 https://www.amazon.com/dp/B0DZ23FCHH?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3

C14 https://www.amazon.com/dp/B0D4V1987W?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3

Extension Cord https://www.amazon.com/dp/B07BBV5XYN?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_1

Power Switch https://www.amazon.com/dp/B08YNP1ZYM?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_2

Hygrometer https://www.amazon.com/dp/B0DNKGBW54?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2

Fan Relay https://www.amazon.com/dp/B0DDXCZRTN?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

120mm Fan https://www.amazon.com/dp/B0DN5MLVPK?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

Wire connectors https://www.amazon.com/dp/B0FJDW43N7?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_16

Wire - 20awg https://www.amazon.com/dp/B0C7T9P8G7?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_12

Wire - 14awg purchased from Home Depot

Filament: PLA or PETG