Xtrons headunit mount for A90 Supra

XTrons mount for the A90 Supra, specifically designed for the XTrons QGB24EVB12THL.

• Might work with other Xtrons unit if they have the same mounting configuration as the above model.
• Is it over-engineered? Yep.
• Will it fit your Supra? Hope so. The outer dash moulding on the Supra doesn't see like the most precise moulding - but I could be wrong.
• Print in ASA or something else that can take the cabin heat. PLA will start to warp (ask me how I know).
• Installation of the speaker cover requires that you slide the metal hooks of the cover into the mount (after the mount is screwed down) and then push it (the speaker cover) down into the dash to secure it.
• There is a Supra logo file that you need to print that slots into the top of the mount and there are two pin holes in the mount in case you need to get it back out.

Print settings:

• Base layer height 0.2 (high quality)
• Variable layer height for the top most curve (where the Supra logo sits).
• The print is angled at 137 deg on the X absolute axis to put the most detail into the top curve. 
• Tree supports (auto).
• Brim enabled.
• I printed this in ASA using default Bambu Studio settings for ASA, and didn't get any warping etc.
• ~ 10-12 print hours depending on rotation and settings etc.