Print Profile(2)
Bill of Materials
- Scotch® Mounting Putty™ x 4: Remove approximately 3 grams of mounting putty and roll into balls. Place on back of model and push firmly against wall to mount. May use other mounting option.
- Scotch® Double-Sided Tape™ x 4: Cut thin and apply to back. Mount to wall. May use other mounting option.
Description
The Amazing Digital Circus' Jax Silhouette Wall Line Art
I've already uploaded a silhouette wall art model of Kinger, Gangle, Bubble, Caine, and Pomni.
You can check those out here.
I've listened to your feedback and after much work and effort….. FINALLY…. Here's JAX!
My preferred method of mounting on wall is Scotch® Mounting Putty™. However, Scotch® Frog Tape™ or just Scotch® Double Sided Tape™ will work as well.
Assembly Difficulty on a scale of 1-10 is going to be at a 1.
No assembly required. Just put mounting tape on it, and it’s good to go. The model was adjusted to make all pieces print into one object.
The entire print takes less than 10 grams of filament and in under 30 min†!
† Print Times May Vary
Perfect last minute gift for any kid’s birthday!
Jax has been scaled to fill the build plate of P/X Printers. If you have a larger printer, you can scale it up, but I recommend keeping the thickness set to 1.2mm for best results, but you can select whatever thickness you prefer.
I am not responsible for any damages or mistakes made by the end-user. The file is ready-to-print, and does not require any adjustments. Adjusting the model is not recommended and should only be done by advanced users, only. If you decide to adjust any settings, please understand you do so at your own risk, and I cannot guarantee print quality.
An A1 Mini profile will be added and available shortly.
You can support me by giving the print a 5 star rating, liking my models, following me on {MakerWorld}, or giving my models a boost!
You can also visit our website
or chip in to buy my next roll of filament.
Follow for more of The Amazing Digital Circus friends to be added! Zooble should be added soon, along with some more Bubble, Ragatha, and more! Many hours of work have went into these models, and I thank you so much for your support! I couldn’t do it without you! New characters are worked on all the time. If you have a special request or a specific character you’d like, from any show, series, I can do my best to try and make something for you.
As always, enjoy! If you have any issues, please don't hesitate to reach out to me directly, by going through my website, message me on MakerWorld or comment below.
Check back frequently for new models to be added!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)