RC Plane Scale Chocks
Print Profile(1)
Description
RC Plane Scale Wheel Chocks
Tired of your expensive models getting blown off the tables/plane stands at your field or shifting around in your car? Print these scale wheel chocks and fix that problem for good!
These chocks are simple to print (no AMS required) and super easy to assemble with CA glue. They are compatible with countless models due to their multi use nature. If your model has smaller wheels or wheel pants, just rotate them 90 degrees and use the mini-chocks connecting the main chocks.
Materials Required:
CA Glue for assembly
Cabinet Bumpers (½" diameter) for Anti-Slip Feet
Assembly Instructions:
- Glue 2 yellow stripes into each chock.
- Secure two connector pieces onto one chock with CA glue. Ensure both mini-chocks are oriented inward toward each other.
- Glue the other side of the connectors to the other chock.
- Attach 4 anti-slip feet into the holes.
- Cut an 18" length of ¼" rope and insert it through the holes in the chocks, tying off the ends.
- Sleep soundly knowing that your expensive models will never get blown off a table again!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)