Ultimea Soundbar Mount for Pole TV Stands

A simple and quick print I put together to get my Ultimea Soundbar mounted to my TV stand.

It's meant only to work with cylinder / pole / pile style TV stands with a diameter of ~41mm and has a bit of room for larger if needed. A spacer is provided if you need to tighten it up more.

Printing Notes

• I HIGHLY recommend you use PETG as the bracket needs to stretch open to go around the pole, as PLA does not handle bending and stress well.
• The spacer can be printed in PLA.
• Do not change the orientation, as this will compromise the strength of the pieces that wraps around the pole.
• You can use M3 machine screws with washers.
• Compatible with H2 series, X1 series, P series and A1 series printers but not A1 mini unfortunately.