Honor Pad X8a wallmount on top of 503 box

HonorPad X8a Wall Mount (Standard 503 Box Compatible)

This is a functional, minimalist wall mount designed specifically for the HonorPad X8a. It is engineered to sit perfectly over a standard 503 electrical box, making it an ideal solution for home automation dashboards (Home Assistant, Google Home, etc.).

Key Features

• Perfect Alignment: The mounting holes are spaced to fit a standard 503 box (Italian/European standard), allowing you to hide power cables and power supplies directly behind the tablet.
• Secure Installation: Includes four screw points—two for the 503 box and an additional two for wall anchors (dowels) to ensure maximum stability and a flush fit against the wall.
• Integrated Charging: Designed with a dedicated slot for a USB-C connector at the bottom, allowing for a permanent, clean power setup without visible cables.
• Heat Management: Features recessed cutouts on the back panel to allow for passive airflow and prevent the tablet from overheating during 24/7 operation.

Print Settings

• Material: PLA+ or PETG (Recommended for better durability and heat resistance).
• Supports: Minimal supports may be needed for the USB-C port area depending on your printer's bridging capabilities.
• Infill: 15-20% (Grid or Gyroid).
• Walls: 3 perimeters for better structural integrity around the screw holes.

Installation Instructions

1. Pass your USB-C cable 90°  through the center of the 503 box.
2. Secure the mount to the 503 box using the two central horizontal screws.
3. (Optional but recommended) Drill and secure the top/bottom auxiliary screws for a rock-solid fit.
4. Slide your HonorPad X8a into the guide rails until it seats into the charging connector.