Yoshi Popcorn Bucket - Free 3D Print Model

Search models, users, collections, and posts

Meuwi

Miniatures>Other Miniatures

IP Report

Print Profile(1)

All

X2D

P1P

P1S

X1 Carbon

H2D

H2S

X1E

P2S

H2D Pro

H2C

A2L

0.2mm layer, 2 walls, 15% infill

Designer

52.9 h

14 plates

4.6(10)

Open in Bambu Studio

Boost

168

462

432

136

Released

Bill of Materials

Bambu Filaments

Select all

Description

V2 Version

https://makerworld.com/de/models/2813757-yoshi-popcorn-bucket-version-2-33-cm#profileId-3132363

Yoshi with Egg – Multicolor 3D Print (33 cm)

This carefully designed Yoshi model sitting with his iconic egg is perfect for gaming fans, collectors, or as a unique display piece.
The model was specifically prepared for multicolor 3D printing and reaches an impressive overall size of approximately 33 cm.

An AMS / multicolor system is recommended to achieve clean color transitions without manual filament changes.

Features

Height: approx. 33 cm
Multicolor print
Optimized for AMS / multicolor printing
Great as decoration or collectible
Smooth and rounded surfaces for a high-quality finish

Printing Notes

Recommended layer height: 0.2 mm
Supports may be required depending on print orientation
PLA recommended for best results
Make sure your printer has enough build volume for the model size

Enjoy printing and displaying your Yoshi!

Comment & Rating (36)

@user_1500791025

Boosted

outstanding! I made my son a blue yoshi and now we are going to see the movie!

The designer has replied

@meuwi

He turned out great! I'm glad your son is happy about it 😊 have fun at the movies 😊

Show original

@Smarty70

Print Profile

0.2mm layer, 2 walls, 15% infill

The fit of some parts was not that good for me at least. I also noticed the non-cut-out body, corrected body came too late for me, I already glued it together. The flap can be clipped in, but doesn't really hold when you open it. The shoe soles are not smooth, so I lowered them by 1mm.

(Edited)

Show original

@Meuwi2

Print Profile

0.2mm layer, 2 walls, 15% infill

It is easy to print and my children were very happy about it :-)

Show original

@3D.Printer2

Thank you for the great popcorn bucket

Show original

@user_1500791025

Boosted

How does the white stomach connect to the body? there was no cut on the body for mounting it.

The designer has replied

@meuwi

Thank you for the hint, I had placed the wrong body on print plate 1. I have now placed the correct body on the print plate and re-uploaded it

Show original

@user_1500791025

Boosted

Replying to @meuwi :

I tried downloading it again and it is the same body that does not fit the white stomach, do you have a link or something for me to find it? I am really looking forward to finishing the project :)

@meuwi

Replying to @user_1500791025 :

I don't know why the old file wasn't overwritten, but the new file is now in there for download

Show original

@Sinchiropus

thank you for your design when I print the arms in the first few seconds everything detaches, I have cleaned the bed a thousand times, I have raised it to 90 degrees, I have sprayed hairspray and it still happens. Has this happened to anyone else, I don't know what to do anymore

The designer has replied

Show original

@meuwi

If I have problems with objects detaching from the print plate, I always use glue from Bambu Lab

Show original

@Sinchiropus

Replying to @meuwi :

gracias

@Sinchiropus

it strikes me as strange that it is due to adhesion since the printer is less than 2 months old but I will try it

Show original

@user_3100934029

I have the problem that my dots for the egg have become very unclean. Edges have partially lifted, generally a bit warped, etc. can this be solved well with certain settings

The designer has replied

Show original

@meuwi

If I have problems with objects detaching from the print plate, I always use glue from Bambu Lab

Show original

@user_3100934029

I always have the problem with the egg that in the first few layers the layer on the left and right does not adhere well because it always warps and the nozzle then constantly grinds over it. On closer inspection, it hardly adheres to the support structure on the left and right. I have already tried to set the layer height smaller, but it doesn't work either. Does anyone have tips?

The designer has replied

Show original

@meuwi

Have you tried Bambu glue yet? Everything sticks to my plate with it

Show original

@user_204019284

Unfortunately, the flap doesn't stay open for me, is there a solution for that

The designer has replied

Show original

@meuwi

Do you have a photo of it

Show original

@user_1500791025

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

My son loves this print! I also now have some other family making requests for it! Definitely 5 out of 5

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Yoshi Holder

IMPERIAL CREATIONS 3D PRINTS

3.1 k

1.8 k

Yoshi Popcorn Bucket Lamp

theStonefox

638

516

Yoshi Popcorn Bucket

Markovich

Yoshi Popcorn Bucket NO AMS ~1KG

Duani11

604

306