Offset Golf Tee with Height Indicator

Offset Golf Tee with Height Indicator

Improve the consistency of your drives with this 3D-printed golf tee. Its offset neck design offers excellent durability and a clean impact, while the graduated shaft (with markings from 35 to 60) allows you to set the exact tee height depending on the club you are using.

To guarantee a perfect and repeatable height on every hole, the design includes a height control ring. This small piece, designed to be printed in TPU, snaps into the grooves on the shaft and acts as a stopper against the grass. This way, you can push the tee into the ground to the exact same depth without having to look at the numbers every single time.

Print Details

• Layer height: 0.16 mm. Ideal for making sure the numbers and the grooves on the shaft are perfectly defined.
• Supports: no supports
• Adhesion: It is highly recommended to use a raft to ensure the piece stays firmly attached to the build plate during printing

Highlighting the Numbers

You can print the piece in a single color (like the white model) and easily highlight the numbers yourself using a permanent marker (as shown in green in the photos) for quick reading on the course.

Included Print Profiles

I have prepared several ready-to-use profiles tailored to different materials and needs:

1. Standard PLA profile: Perfect for a quick and rigid finish
2. Standard PETG profile: Highly recommended for golf tees, as it offers greater flexibility, handles clubface impacts better, and withstands outdoor temperatures
3. TPU profile: Optimized for the movable height control ring, allowing it to be flexible enough to snap on but tight enough to grip the shaft securely