Travel Case for Logitech Superstrike/Superlight

This is my first model on MakerWorld, I was pretty disappointed in the quality of offerings for 3d printable cases for my Logitech Pro x2 Superstrike (which conveniently is the same size and shape as the Logitech G Pro X Superlight 2).

So, with no CAD experience and a lot of spare time off I went. 
This model has space for all the goodies included with your Superstrike or Superlight 2.

Some things to note. 
1. The tolerances are tight, Make sure your filament is dry and your machine is calibrated. 
2. There is one layer of space 0.2mm above the magnets when inserted. I recommend tapping with something to ensure they're seated fully. 
3. There are magnets in both the lid and the body that keep the lid in place. They are 8x2mm Here's a link to the pack I used on Amazon. I am not affiliated and make no money if you purchase something from them. This is simply exactly the product I purchased. 
4. There is about 1mm of space between the lid and the mouse. I plan on using some adhesive felt on the bottom side of the lid to protect the mouse top from scuffs. I plan on running to my local Hobby Lobby but something like This felt from Amazon should work fine. 
5. I printed the model pictured on a bone stock Bambu A1 w/AMS lite. I don't have any other machines so your mileage may vary. 

I hope this model is useful to someone, leave a comment if you liked it (or if you thought it was trash).