Flower Bambu Door Handle P1S, P1P, X1 Series, P2S

Update 08/04/26 - there still seems to be an issue with the fit of these handles, even with the bigger tolerances. Tolerances can vary depending on filament type, printer, settings etc. Therefore I've added a print profile with a tolerance test print. It is a very quick print that includes six hole sizes, each numbered. Unscrew the handle and fit it into each hole to find the best fit. This will then tell you which size print profile to download and print which are also numbered. All print profiles except size two have all three flowers included so you can select the plate depending on which flower you prefer. Size 2 has three seperate print profiles as that was the original size I uploaded. Any further issues just let me know.

Below are some pictures of the flower fitted onto the door handle in case there is any confusion on how to install it.

Update 07/04/26 - there have been some reports of the hole not being big enough to slot the flower onto the handle. I have added new print profiles with larger tolerances to allow easier fitting.

If you love flowers and want to jazz up your Bambu printer, here is your next print! 

This daisy fits around the door handle of the printer and is compatible with many Bambu Lab printers including P1S, P1 Series, P2S and X1 Series.

There are three sizes available, each size has it's own print profile.

To install, simply unscrew and remove the handle from the door and then fit the daisy onto the handle. Then screw the handle back on.

Please note I have tested this in Bambu PLA basic and matte. I have not tested with other filament types so cannot guarantee how well it fits. I am happy to make adjustments to the design if requested.