Print Profile(1)
Description
I can create any can for you in the desired size up to approximately 25x25cm.
Small cans as sewing weights for cutting when sewing. Includes note marked in red.
I can gladly still provide the STL because I only have the 3mf with my good PETG profile here.
First, the story behind it. A friend from Switzerland wanted sewing weights, so we thought about it. Because due to an illness, she sometimes can hardly grip, and they shouldn't be too heavy either.
And so we came up with the cans with washers.
So I have a small can here. A large can is also in my profile.
10 washers with a diameter of 2.5 cm fit in here. Take a look at all the pictures.
You can of course also use the cans for something else, for example cream or for storage.
I would be happy about a like.
IMPORTANT!!! Depending on your printer's dimensional accuracy:
if you have printed the cans and screw them shut, it is possible that they initially won't close properly.
Therefore, please turn them open and closed very often and then you will see that after a few turns they will close more and more until
they are completely closed. See also picture 2 for this.
You can also carefully remove any filament remnants from the thread beforehand. Then it will be even easier.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)