Trunks Pop Art Hueforge
Print Profile(1)
Description
Enjoying this project? Consider supporting me on Ko-fi!
>>> https://ko-fi.com/boardgamerdimontagna <<<
Check out the other characters and print them all!
Project: Trunks.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 129.46x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.8mm and the Actual Depth is 1.9mm
Filaments Used:
PLA+ Esun Dark Blue Transmission Distance: 2
PLA+ Esun Red Transmission Distance: 6
PLA+ Esun Space Blue Transmission Distance: 3.5
PLA+ Sunlu Beige Transmission Distance: 7.6
This print uses 4 unique filaments
Swap Instructions:
Start with Dark Blue
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Space Blue
At layer #16 (1.36mm) swap to Beige for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)