Print Profile(1)
Description
• ───────────────── •
Downloading the original STL recommended!
I had to simplify the print profile to be able to upload it!
Snowy forest from bird's eye view - HueForge
Project: HavaserdoFF12.hfp
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm
The Model is 200x149.9mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
#0d110e PLA Overture Black Transmission Distance: 0.7
#63646b PLA Overture Space Gray (Overture) Transmission Distance: 2.1
#e0e7f0 PLA Elegoo White Transmission Distance: 5.5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.72mm) swap to Space Gray (Overture)
At layer #7 (0.96mm) swap to White for the rest.
Boost Me (for free)
If you would like to see more pictures like this, you can give it a boost!
If you print this, leave a comment. Show me how it turned out and tell me what you think.
• ───────────────── •
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)