Lord of the Rings - The Fellowship of the Streets

The Lord of the Rings - The Fellowship of the Streets

During the 6th age of Middle Earth, the lands have been covered in not only darkness but dense urban sprawl. The shadow of thick corporate greed is blotting the land with a distopian agenda of control. Only a Fellowship of the Streets can thwart the scheming of the evil Mordor Korp and claim black the freedom once enjoyed by their forebares. In possesion of the Smart Ring to control them all they must journey to the heart of the corporate world to return the digital information from whence it came. 

Formed at the Rivendell Gentlemens Club the Fellowship, made up of people from different walks of life, have come together to banish the corporations once and for all from the urban wasteland which is quickly speading to all areas, in a pile of ewaste and datacentres.

They are interpretations and not made to completeley resemble the movie cast however I have tried to make each one as similar as possible. (I am not great when trying to model/match real famous people)

All 9 of the fellowship are included in the first print profile as non colour full models. Each person has their own full colour print profile, broken down into parts for easier printing. 

Full colour models do require an AMS, each are no more than four colours on a part for AMS lite users. Full colour models do produce a fair amount of waste due to significant detail and colour changes, so be aware before printing, the time is largeley due to colour changes and not the size of the models. 

Each model is roughly 3" tall. 

📌 Recommended printing settings:

• Material: PLA
• Layer height: 0.16 mm
• Infill: 15 to 20%
• Nozzle: 0.4mm

supports where nessesary - I have tried to make it so all have a surface contacting the plate however due to the detail and complexity of the modeling they sometimes require alot of support, so be aware and be carefull during support removal. Use a naked flame gentley and for short intervals to clean surfaces after removal

Assembly – Recommended Method on multipart models

• Dry fit: Assemble all parts without glue to check alignment and fit.
• Cleanup: Lightly deburr edges and pegs where nessesary with a file/modeling tool to ensure uniform contact. All parts are tested and fit together.
• Optional fix: Use glue for permanent assembly.

NOT AI, NO AI COLOUR PICS WHICH DISGUISE A POOR DETAILED SINGLE COLOUR PRINT. REAL PRINTED RESULTS!

MOST OF MY MODELS ARE FAN ART RECREATIONS AND ARE FOR PERSONAL USE ONLY  : MY MODELS ARE UNOFFICIAL FAN ART AND ARE NOT AFFILIATED OR ENDORSED BY THIRD PARTY IP HOLDERS

Thankyou to everyone who has rated and boosted my prints, if you like the models and want to continue to support the creation of more please consider boosting, it really does help incentivise the creation of more models for makerworld. 

If you would like to "buy me a coffee" to support the continued creation of fun prints you can do so here;

All of my models posted here are free for you to use commercially for free. I make them as a hobby and a bit of fun, with the points helping supply filament and consumables. All i ask if you wish to support my designs and want to sell them is that you are aware of the IP infringement which apply to some of the models and take appropriate responsibility. Please also boost them as much as you can and help with the points and please correctly attribute the model design to this page in your descriptions etc - Thankyou again everyone!