Search models, users, collections, and posts

Owala 40oz Tesla Cupholder

Print Profile(1)

All
P1S
P1P
H2D
H2S
A1
X1E
H2C
A1 mini
X1 Carbon
P2S
X1
H2D Pro
X2D
A2L

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
9.9 h
4 plates
4.6(7)

Open in Bambu Studio
Boost
35
138
10
0
167
109
Released 

Description

Boost Me (for free)

Boost me if you found this design helpful! It's free and helps me out greatly.

I got tired of my 40oz Owala ending up on the floor of my car.

 

I tried a few existing adapters, but none of them worked for how people actually use these bottles. Some ignored the rubber insert inside the Tesla cupholder. Others only worked if you removed the silicone sock from the bottle. I did not want to change my setup just to make an adapter work.

 

This adapter is made specifically for a 40oz Owala and comes in four versions so you can choose the one that matches your setup exactly. It sits securely in the cupholder and keeps the bottle upright instead of sliding or tipping over while driving.

 

Available versions

• Bottle with silicone sock and cupholder rubber insert

• Bottle with silicone sock and no cupholder insert

• Bottle without silicone sock and cupholder rubber insert

• Bottle without silicone sock and no cupholder insert

Comment & Rating (10)

(0/1000)

Print Profile
0.2mm layer, 2 walls, 15% infill
Cool design, unfortunately on my A1 it turned into spaghetti at the top half twice, once with PETG and once with PLA :( Any tips appreciated (I'm new to printing)! Should I use supports, or is there a specific orientation you recommend? Love the idea and want to get it working.
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
can you make same one but for Hondas like SUV’s the base that goes in the cup holder needs to be 1/2 bigger in diameter.
(Edited)
The profile uploader has replied
0
Reply
hi! I unfortunately don’t know the dimensions but if you had a caliper and could measure I’d be able to make adjustments for you.
0
Reply
so the bottom of the cup holder needs to be 84mm to the bend currently yours is at roughly 66.87mm at the bend, the bottom diameter part of the cup would need to increase to 80.59 from 71.80mm hope this helps let me know if you need pictures. thanks
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Fits well in both a Tesla Model 3 and a Lexus NX
0
Reply
excellent fit
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
works for owala with rubber holder
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.