Case for PINGEQUA Cardputer ADV Hydra RF Module

Case for PINGEQUA M5Stack Cardputer ADV Hydra RF Module

This is the custom enclosure for the PINGEQUA Hydra-RF Pro Module, a CC1101 & NRF24 expansion module designed for the M5Stack Cardputer ADV. It protects the PCB while keeping the setup compact.

To assemble this case, you will need:

1x Hydra-RF Pro Module
4x M2×8mm Phillips Countersunk Self-tapping Screws (Essential for securing the case), like below is the best.

Print Settings
Material: PLA (Recommended), PETG

Supports: Minimal supports may be needed depending on orientation.

You can get the Hydra-RF Pro Module here:

👉 Official Store: https://www.pingequa.com

https://www.pingequa.com/products/m5stack-cardputer-adv-hydra-rf-924-pro?variant=40856014848064

https://www.pingequa.com/products/m5stack-cardputer-adv-2-in-1-rf-module?variant=40846593884224

Amazon: Search PINGEQUA Cardputer ADV, or Click: 

https://www.amazon.com/dp/B0GBWTJBCR

https://www.amazon.com/dp/B0GF7HHH5W

AliExpress: Search PINGEQUA Cardputer ADV