Stranger Things: Reversible Coasters - Free 3D Print Model

Search models, users, collections, and posts

mrs.physiotherapist

Generative 3D Model>Image to Keychain

IP Report

This model is created by Image to Keychain

Make Your Model

Print Profile(1)

All

A1 mini

P1S

P1P

H2D

P2S

H2D Pro

X1E

H2C

X1 Carbon

H2S

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

15.1 h

9 plates

4.8(16)

Open in Bambu Studio

Boost

266

723

512

237

Released

Description

Stylish set of 3D-printed coasters inspired by the Stranger Things series. Each coaster is double-sided: one side depicts our "normal world," while the other is consumed by the dark atmosphere of "The Upside Down." A perfect accessory for fans who appreciate both functionality and the iconic duality of two worlds right on their table.
Technical details:
Design: Double-sided with detailed texture

Stranger Things

coasters

Comment & Rating (29)

@user_3814484790

Print Profile

0.2mm layer, 2 walls, 15% infill

Wow all the models are exceptional. The printing is breathtaking. It's a work of very high quality. Thank you for this excellent creation and for sharing ⭐️ ⭐️ ⭐️ ⭐️ ⭐️

Show original

@user_3000068880

what nozzle have you used

Show original

@user_3814484790

The 0.4 and the result is magnificent Thank you again for your excellent work ⭐️ ⭐️ ⭐️ ⭐️ ⭐️

Show original

@tigagi67

Fantastic!!!! Thank you very much for this masterpiece :) are you planning to do the other characters? I'm thinking of Robin, Steve, Nancy, Eddie, Joyce and Hopper? and the American/Russian too :) etc

(Edited)

Show original

@user_576930829

Boosted

🔝 👌🏼Thank you!

Show original

@GaGod1234

Print Profile

0.2mm layer, 2 walls, 15% infill

The project is very good, but my color choice was unfortunate, because I hadn't noticed that the piece was double-sided

Show original

@BlueBugger

Print Profile

0.2mm layer, 2 walls, 15% infill

No solid layer between infill and image which lead to holes and poor quality finish.

@user_186597007

Print Profile

0.2mm layer, 2 walls, 15% infill

@XavierArslan

AI model and description

@TheTene

Hello, the file does not open. A real shame because they are magnificent

The designer has replied

Show original

@mrs.physio

Why won't it open? What does it say to you?

@JabaPrinter3D

It takes a very long time for the file to open. Just be patient, then it will work. For me, it takes about two to three minutes to open

Show original

@TheTene

Replying to @JabaPrinter3D :

Hello, indeed you have to wait a long time :p same for cutting the file I will take my time and I will try :) (as a keychain a little smaller I think it would be great too, I will see about doing it smaller and adding a hole (0.2 nozzle). Thanks for the tip!

(Edited)

Show original

@inquisitor25

Boosted

Omg I love these!

@OdiWan72

Print Profile

0.2mm layer, 2 walls, 15% infill

Fresh off the printer! The details on this model are insane!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.