Measuring Adapter CEE 16A/32A
Print Profile(4)
Bill of Materials
- Schraube M3x6 Senkkopf x 2:
- Messbuchse Hirschmann SEB 2610F x 5: verschiedene Farben
- Mennekes CEE 16A Stecker 13510 x 1:
- Mennekes CEE 16A Kupplung 14510 x 1:
- Mennekes CEE 32A Stecker 13520 x 1:
- Mennekes CEE 32A Kupplung 14520 x 1:
- Litzen 2,5mm² x 5: verschiedene Farben
- Aderendhülsen x 5:
- Flachstecker 4,8mm x 5:
Description
Measuring adapter to connect 4mm test leads to CEE three-phase plugs. Suitable for 16 and 32A plugs and couplers. Mennekes plugs and couplers are used as the base, and the cable gland is removed; the printed part is then inserted and screwed in.
Caution! Warning! Intended for use by qualified personnel only. Electrical current can be life-threatening!
Tips for modifying the plug housing.
- Unscrew cable gland and seal
- Saw off the sleeve of the cable gland or drill it open with a large drill bit
- Remove webs and back panel with a file or Dremel until a round hole is created (16A 42mm, 32A 52mm)
- For the 16A version, file out a larger recess for the PE measuring socket
- Drill 2 holes of 2.5mm laterally, countersink, and cut M3 threads. (Position 16A 8mm, 32A 11mm from edge)
- Prepare cables and assemble everything
- Metrological inspection of connections and insulation
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)