Marker holder brush storage pen holder Type D

I. Introduction to Super Pen Holder Type D Features:

• More Marker Storage Space: Type D is a specialized adjustment based on the Bpro type frame. Type D is mainly geared towards tool storage. Compared to previous models, it removes all marker fixing holes and replaces them with 4 parallelogram-shaped and 2 trapezoidal tool storage compartments, allowing for the storage of commonly used small and medium-sized long tools

  

• Supports Magnetic Expansion: This model and subsequent models are equipped with magnetic interfaces of a unified specification. You can attach 6 pieces of 6X2.5mm strong magnets (ensure all are installed with uniform magnetic polarity) to effectively expand with magnetic kits recently released in the universal module model collection

  

II. Printing Notes:

• Try to use PLA for printing. Tests have shown that PETG has a risk of warping, which can easily lead to an uneven bottom, and can only be compensated for with a sponge mat

  

• This model has been optimized for 3D characteristics, has no overhangs, no supports needed, and has no special requirements for printing parameters or filament, so you can set basic parameters according to your preference

III. Model Scaling Operation Reference:

• For those who need to scale it up for use, be sure to measure the distance between the bottom and top surfaces of the hole after scaling to ensure it is not shorter than the length of your marker pen body. Otherwise, it might make the pens difficult to retrieve. The middle row of marker pen holes in the main body will be slightly higher! Tests have shown that if your marker cap diameter is greater than 14mm, this pen holder will be difficult to fit
• 
• It is important to know that the inscribed circle diameter of the designed hexagonal hole is 12mm, and the wall thickness is 1mm

• Enter the slicing software and combine the pen holder and palette (scaling them individually will increase tolerance)

  

• Use the measuring tool to select the same side of two adjacent holes in the middle of the main body (which includes the outer wall thickness, default is 13mm) to measure against your marker cap diameter, which is approximately 12.5mm

  

• A 0.5mm difference between the two dimensions yields the best result. Assuming your marker is 13.5mm, click the modify button and enter 14, then select scale all, note

  

IV. Dimension Drawings

V. Renderings Showing Pairing with Modules

VI. Quick Links to Related Models

Type A➡️Click to jump

Type B➡️Click to jump

Type C➡️Click to jump

Type D➡️Click to jump

Module➡️Click to jump

Friends who need a pen holder or tool box can try this one out➡️Click to jump

Focus on completing every model work, come and print now!