Modular wire management tray - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Salacious_sloth

Household>Office

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 3 walls, 25% infill

24.8 h

10 plates

4.9(167)

a1-mini 0.2mm layer, 3 walls, 25% infill

15.3 h

6 plates

4.7(29)

0.2mm layer, 2 walls, 25% infill less warping

30.8 h

11 plates

4.6(5)

Open in Bambu Studio

Boost

1399

3980

237

236

4.5 k

2.2 k

Released

Description

Standard tray footprint is 200mm x 70mm with a usable volume of 200mm x 60mm x 20mm.
Mini tray is the same except for a 160mm length and closer screw holes to fit within Prusa mini and Bambu A1 mini build envelope.

Screw mount version uses (4) #8 flat-head screws per tray. No supports required.

Double sided tape version has tracks for ¼" 3M VHB strips. Supports required on build plate only

Print settings should be pretty forgiving as long as you use a decent wall thickness. I used a 0.6 nozzle, 0.2 layer height, 2 perimeters, and 25% cubic infill with ASA. If you're using PLA, you may need to shrink the clips slightly along the long axis to get a tight snap fit on the posts.

cable

management

wire

Comment & Rating (237)

@Bambeautiful

Print Profile

0.2mm layer, 3 walls, 25% infill

delicate model, sides break very easy, and the clamps need to be 2mm shorter, else they will not fit. but, the model does what is advertised, now my dogs don't pull the power from my laptop any more.

The profile uploader has replied

@retsoek

thanks for the feedback. you might wanna share it under the model. you rated the printing profile.

(Edited)

@calebpunshon

Replying to @retsoek :

the original seems to be deleted so it’s defaulting to your print profile now

(Edited)

@rdbud

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

Works great! Thank you!

@rob_otter

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

perfect!

@scissors

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

Awesome design! Super handy and easy to use. Looks great underneath my desk as well! Super useful for organizing cables for my setup. I highly recommend this! it helped me get every single cable off of the floor!

@kasperkostorz

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

high quality

@zj7909

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

This is awesome. Thabk you! hot glue is holding it up under my desk. printin g more now!

(Edited)

@Antyquariat

Very nice!!! 👍 Thanks!!!

@Jmc121

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

exactly what I was looking for and made my desk look 10x better. I printed 7 of them and screwed them under the desk and then seem very solid.

@Lt.Jaaack04

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

Very happy:) I printed 4x of the 30mm tray on my P2S out of matte black PLA and it came out very nice. I also printed some spacers/washers to got between the tray and my desk and my desk isn’t thick enough for the size screw I was using, and I’m happy with how it came out. I managed to snap two of the side pieces off though but that’s just because I’m a dummy trying to force a wire in a gap that’s too small for it lol. 10/10 would reccomend

@TrojanSoccer14

Print Profile

0.2mm layer, 3 walls, 25% infill

Awesome print, everything came out great! My only suggestion for a future iteration would be to widen the slots. I’d love to run thicker monitor cables outside the part halfway through. If you ever update the design or release a 'Large Cable' version, let me know, I’ve got another desk that needs this!"