Type 86 switch/socket 1 - dirt-resistant decorative panel/key hook - scaled Marshall JCM900 - no supports
Print Profile(1)
Description
1. Introduction:
Panel frame anti-smudge + key hanger decorative panel for Type 86 switches/sockets, Marshall model from the guitarist series
Proportionately scaled-down JCM900 and cabinet
A total of 6 plates:
1. The upper amp head and speaker cabinet are integrated, and the lower cabinet is printed separately, then snapped onto the upper part to form a complete unit
2. Distinguished by whether it has a key hook and whether it has a flanged edge:
Without a flanged edge, the opening is an 86mm square, which can perfectly snap onto the switch/socket
With a flanged edge, it has a flange that is 1.5mm smaller on each side than 86mm and 0.4mm thick, used to clamp between the Type 86 switch/socket panel and the wall for greater stability
2. Features
Material: PLA/PETG
Supports required: No
Are other parts besides 3D filament needed: No
3. Three colors of filament are required: black, white, gold
1-8 layers: Black
9-12 layers: Gold
13-16 layers: Black
17-20 layers: White
21-23 layers: Gold/Black
24 layers and above: Black
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)