Selfie Ring Light - Phone holder - tripod mounted

Selfie Ring Light

Introducing this Selfie Ring Light – your personal illumination solution for flawless selfies and captivating content creation!

Achieve professional-grade results from the comfort of your own space.

Say goodbye to harsh shadows and unflattering angles – with this Selfie Ring Light, you'll effortlessly illuminate your face with a soft, even glow, enhancing your features and elevating your selfies to the next level. Print this Selfie Ring Light today!

Materials Needed:

• LED strip, 150cm (color of your choice - I used natural white 4200K - 120 or 240 LED's per meter): Example Link
• Wires, soldering iron, Alu tape, 4 x M3 bolts 8mm

You can always use another type of LED light. Just ensure you choose the correct voltage and watt.

Step-by-Step Guide: Check the assembly guide

• Print the 2 print-profiles (only 1 for the LED cover, choose between PLA or PC):
  • Print profile 1 is for the Base, Mounting bracket, Phone Arm and holder
  • Print profile 2 is for the LED cover, printed in PLA
  • Print profile 3 is for the LED cover, printed in PC
    

1. Take the base part and add some ALU tape inside for reflection
2. Mount the tripod mount on the back of the base
3. Start adding the LED strips on both sides of the base and connect them together
4. Connect one end of the LED strip with a cable and put the cable thru the hole of the base and tripod mount
5. Press the LED cover to the base
6. Assemble the phone arm
7. Add some rubber bands
8. Put the assembly in the tripod base and secure it (optionally) with a bolt

You are ready to start creating professional photo’s or video’s.

Enjoy!

Dimensions

• Diameter: 240mm

How to print

Please use the predefined print profiles. There are different settings for each item on the buildplates to ensure the look and strength.

All parts are printed by object.

Everything from print profile 1 is printed in PLA.

Choose between print profile 2 and 3 for the LED cover. The LED cover can be printed in a translucent material, PLA or PC. In the pictures I have 1 printed in regular PLA+ and 1 in PC.

Buildplates

Print profile 1:

Buildplate 1: Base

Buildplate 2: Tripod mount and nut

Buildplate 3: Phone holder and arm

Led cover profile

Print profile 2:

Buildplate 1: LED cover in PLA

Print profile 3:

Buildplate 1: LED cover in PC

Print time and used material

Print profile 1: Buildplate 1 to 3:

• Filament: 127gr
• Print time: 4 hour 15 minutes
• I used PLAblack for Print profile 1 .

Print profile 2: Buildplate 1:

• Filament: 25gr
• Print time: 1 hour
• I used PLA+ White

Print profile 3: Buildplate 1:

• Filament: 18gr
• Print time: 1 hour
• I used PC transparent

If you find my model useful, please like :-)

My other models: https://makerworld.com/en/u/1830894672