Search models, users, collections, and posts
SSD holder for the Samsung T7 Classic
IP Report
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
1.9 h
1 plate
Open in Bambu Studio
Boost
48
158
8
2
186
110
Released
Description
This is a custom SSD holder for the Samsung T7, designed to be mounted on the back of a laptop using a bayonet-style locking system, similar to Quadlock mounts (but not compatible with Quadlock).
The design is an adaptation based on:
⚠️ Important note:
The bayonet mechanism is intentionally a bit tight at first use. To achieve the correct smooth motion, insert the SSD case into the mount and rotate it several times. With a little wear-in, the lock/unlock motion becomes much easier and stable.
Printed in PETG for durability and flexibility. PLA also works, but PETG is recommended if you attach and remove the SSD frequently.
Attach the base to laptop using double sided tape or velcro.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (8)