Two Way To One Way Mechanism Toy Gearbox Clutches

FIRST RELEASE, help me to improve this model

The mechanism inside the box include two one way clutches print in place like this: https://makerworld.com/en/models/662250-one-way-clutch-printinplace-freewheel-ruota-libera#profileId-589437

The Input crank can rotate forward or backward and directly move the Tweety indicator.
The inner mechanism costrain Sylvester to rotate allways in only one direction.

This is the first release of this project, some component need to be perfectionated, i'll do time permitting..

Try to mount it following the images.. 

Disposte the crank in the inner plate (the flat one with threads), remember the bushing with exagon
 

Inser the two OneWay Clutches, before the little one. (pay attensione the direction of the two clutches must be the opposite)

then position the other 3 Gears (the block of 3, the bottom one and the topper one inside the axe

Pay attention the arrow of the gear teeth matches the right direction

Position the cover and insert screws to fix the gears position (the thert screw is only to close the lid)

Position the plate to the conic position (Sylvester) ONE DIRECTION rotation

Finish with the two rirection pointer (Tweety)

Thank you for you help to love this project