TInkerbell See-trough

Please rate if you print, this really helps me, thank you

You can resize the model, but only change the X- and Y-axis NEVER change the Z-axis

FOR A1 MINI USERS, YOU CAN OPEN THE FILE AND REORIENTATE THE HUEFORGE ON THE BUILDPLATE

Please rate if you print, this really helps me, thank you,

ONLY 2 COLORS

Hi everyone, this is a special one. You can change the green for another color if you want (no dark colors). If you put a light behind it or in front of a window, the green (or other color) will be see-trough. I hope you like it. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x149.8mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA Prusament Galaxy Green Transmission Distance: 3.2
    PLA BambuLab Basic Jade White Transmission Distance: 4.7

This print uses 2 unique filaments

Swap Instructions:
    Start with Galaxy Green
    At layer #24 (2mm) swap to Jade White for the rest.