Policeman

Cartoon - Policeman – standing figure

Description:

This 3D-printed figure depicts a cartoon-style policeman in an upright pose. Ideal as decoration, a collector's item, or a gift. The figure is designed for easy production on common FDM 3D printers.

Print Details

Layer height: 0.2 mm (fine level of detail, good balance between quality and print time)

Nozzle diameter: 0.4 mm

Filament consumption: approx. 22.28 m PLA (≈ ~66–70 g, depending on filament density)

Material recommendation: PLA or PETG

Support: Depending on the orientation, support structure may be required (especially under arms and cap)

Infill: 10% recommended for stability

Recommended print settings (for Elegoo Neptune 3 Pro)

Nozzle temperature: 200–205 °C (PLA)

Heated bed: 60 °C

Print speed: 50 mm/s for fine details

Fan: 100% from Layer 3

Retraction: 5 mm at 25 mm/s (Bowden system)

Support: Tree