Demon Slayer - Hashira Date, Love and Serpent
Print Profile(1)
Description
Boost Me (for free)
Hi! If you like what I do and have an unused Boost, it would go a long way towards me being able to produce more anime Hueforges more rapidly!
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
The Model is 129.64x230.01mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 2.6
PLA Bambu Metal Copper Brown Transmission Distance: 0.5
PLA Bambu Basic Gold Transmission Distance: 2.8
PLA Bambu Metal Iridium Gold Transmission Distance: 1
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA PolyLite Pro Cold White Transmission Distance: 0.5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #21 (1.04mm) swap to Blue Gray
At layer #27 (1.28mm) swap to Copper Brown
At layer #34 (1.56mm) swap to Gold
At layer #35 (1.6mm) swap to Iridium Gold
At layer #42 (1.88mm) swap to Jade White
At layer #48 (2.12mm) swap to Cold White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)