Frankford Arsenal hand deprimer collets

Deprimer collet replacements for the Frankford Arsenal Hand Deprimer (SKU 909283).

These collars replace the flexible ones that come with the tool which you're supposed to be able to “store on the tool” but which always fall off and are easy to lose. At least if I lose these it's 15 minutes and a few cents of plastic to replace them.

I suggest removing the O-ring that comes with the tool if using these fixed collars to make swapping them faster.

Tested Sizes (based on fired brass I have in my bins):

• .45ACP
  Also works for: .308 Winchester, .30-06 Springfield
  Untested but should work with: 6.5 Creedmoor
• 7.62x39 (M43)
• 9mm Luger (9x19mm)
• 5.56 NATO
  Also works for: .357 Magnum, .38 Special, .30 Carbine
• FN 5.7x28mm
  Note: The FN 5.7 cartridge fits in the primer hole in the tool, so this will require an insert so the primer gets pushed out without the whole cartridge getting stuck in the hole. This insert is not included in the design.

Untested Sizes (based on cartridge base dimensions, let me know if these work):

• .50AE

  May also work for: .300 WinMag, 6.5PRC

• .338 Lapua Magnum
  May also work for: 6.5PRC
  (I think this is about the maximum case size you can stuff into the tool.)