Search models, users, collections, and posts
4 in Window vent bracket
IP Report
Print Profile(0)
Add the first print profile to earn points
Boost
17
43
0
1
47
12
Released
Bill of Materials
List other parts
- White Corrugated Twinwall Plastic Sheet x 1: https://www.homedepot.com/p/Coroplast-36-in-x-72-in-x-0-157-in-4mm-White-Corrugated-Twinwall-Plastic-Sheet-COR-3672/202771364
- Inline Duct Fan 4 Inch Vent Booster x 1: https://www.amazon.com/dp/B08LY4Q5GY?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
Description
Boost Me (for free)
Boost me if this item helps you in any way! Thanks
This is the bracket I designed to work with an inline fan. I mounted it on each side of corrugated plastic and have used it for over a year no issues. I printed mine in PLA, it has weathered well. It would not hurt to print in PETG though if it is going to get super hot. Mine is in a basement window so the air is always cooler.
I use M3 screws to clamp the 2 brackets together on either side of the plastic sheet. This provides plenty of hold. The screw length will depend on the material used.
The inline fan will slide directly into the collar. Connect the 4 in hose to the other side of the inline fan using a screw band.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)