Q-tip travel case,container - Free 3D Print Model

Search models, users, collections, and posts

Pyciu

Household>Other House Models

IP Report

Print Profile(1)

All

H2D

P1P

X1E

A1 mini

X1 Carbon

P1S

H2D Pro

0.24mm layer, 2 walls, 15% infill

Designer

1.5 h

1 plate

4.9(162)

Open in Bambu Studio

Boost

471

1381

193

2.3 k

1.8 k

Released

Description

Q-tip travel case, container fast printing cool design

cotton swab container

cotton swab dispenser

cotton buds and disks

cotton

Comment & Rating (193)

@marine0241

Print Profile

0.24mm layer, 2 walls, 15% infill

nice design works perfect. I had one small defect but does not impact it’s use.

The profile uploader has replied

@Pyciu

Thanks 😀

@Mr.Ham

Print Profile

0.24mm layer, 2 walls, 15% infill

Printed four of them. All of them turned out perfect.

The profile uploader has replied

@Pyciu

Super Thanks 😀

@user_2667241429

I printed it in PLA, it turned out well, good fit, and good size

The designer has replied

Show original

@Pyciu

Super Thanks 😀

@Ginge2008

Print Profile

0.24mm layer, 2 walls, 15% infill

Came out great with zero issues. You cant even see the seam where the lid screws to the body unless you look very closely and notice the very minor shift in the pattern between the objects.

The profile uploader has replied

@Pyciu

Super Thanks 😀

@ARitt14

Print Profile

0.24mm layer, 2 walls, 15% infill

Perfect! Printed in ASA for heat resistance so I can keep one in my work bag and one in my car. Thank you!

The profile uploader has replied

@Pyciu

Thanks 😀

(Edited)

@user_5044274

Print Profile

0.24mm layer, 2 walls, 15% infill

Almost perfect When you close the lid, the pattern is not 100% correct, but this is only noticeable upon close inspection A great product

The profile uploader has replied

Show original

@Pyciu

Thanks 😀

@user_1971827659

Print Profile

0.24mm layer, 2 walls, 15% infill

Love these! Thank you. The whole family want them.

The profile uploader has replied

@Pyciu

Thanks 😀

@EnDansker

Print Profile

0.24mm layer, 2 walls, 15% infill

So great, bin looking for something to store those in 👌

The profile uploader has replied

@Pyciu

Thanks 😀

@user_1986063794

Boosted

Print Profile

0.24mm layer, 2 walls, 15% infill

very nice Design. Easy to print and the Most Important: it is functional ☺️ many thanks!

The profile uploader has replied

@Pyciu

Super Thanks 😀

@user_2725471185

Print Profile

0.24mm layer, 2 walls, 15% infill

good print

The profile uploader has replied

@Pyciu

Thanks 😀

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.