Zimablade/board 10" Quad Rear Drive Mount

When going down the tiny rack path something was clear, coming from having dealt with loads of 19" Rack things, the space usage in the 10" Racks appears to be less than optimally used.

I designed this to utilize the space of the 10" Rack better as the rear of the Rack does not need to be a blank canvas.

This model sticks out 4CM at the back in the same U that holds 2 Zimaboard1's to fully use the U that the Dual Zimaboard1's are mounted in.

Using the source model I cut away everything apart from the SSD mounts and made duplicates which gives a total of 4 SSD bays in the rear.
Moving the rack ears back 4CM to allow for a full 5CM clearance internally in the rack for the cabling.