Fairy Garden Coffee Shop

My wife asked me to make a coffee shop 3d model for her Fairy Garden.

I took a picture of one of her existing fairy houses so it would match and used ChatGPT to design this one to match.

I created it with a circle on the top front that can be used for any circular logo such as used by a large and famous coffee shop chain.

There are any number of round coffee logos on Makerworld that can be resized to fit in the 39.5 mm hole. Some glue or double sided tape works great. I designed one in Hueforge for “Fairy Good Coffee” and included the .3mf file for printing.

I used “Jarees PLA Plus/Pro Filament Olive Green” which makes a nice slightly shiny print but it can be printed white and hand painted or filament painted in Bambu Studio.

The information for the “Fairy Good Coffee Hueforge” is:
Project: Fairy+Good+Coffee.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 39.5x39.5mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.44mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #163f0d PLA Prusament Army Green  Transmission Distance: 0.4
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Army Green
    At layer #9 (0.8mm) swap to White for the rest.