Shifter Detent for Ford | Fix for FL1Z-7210-BA

(Introduction - The Problem)

Is the gear shifter in your Ford F-150, Expedition, or Lincoln Navigator feeling loose, sloppy, or missing that satisfying "click" when you move it between gears (Park, Reverse, Drive, etc.)? Did you attempt a DIY repair, like replacing the "park detect" microswitch, only to break the small, fragile white plastic part that provides the tactile feel?

You've found the solution. This is a free, 3D-printable model (STL file) for a replacement shifter detent plunger, the very part that commonly fails or breaks within the floor shifter assembly.

(The Solution - Free DIY Fix)

Instead of paying a dealership nearly $500 for a complete new shifter assembly (Ford part number FL1Z-7210-BA and others), you can download and print this part yourself. This model has been carefully designed and tested to be a durable, direct-fit replacement. When printed in ABS, it holds up beautifully and restores the crisp, tactile feedback your shifter had when it was new.

This is an original work, shared with the community to help others save money and keep their vehicles running well.

(Symptoms of a Broken Shifter Detent)

You likely need this part if you are experiencing:

• A mushy or sloppy gear selector feel.
• No distinct clicking sound or feeling when shifting between gears.
• The shifter moves too easily without positive engagement points.
• A broken plastic piece was discovered during another console repair.

(Compatibility & Vehicle Fitment)

This 3D model is designed for the console-mounted shifters in a wide range of Ford and Lincoln models. If your truck or SUV has a similar floor shifter, this part will likely fit.

• Ford F-150: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
• Ford Expedition: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
• Lincoln Navigator: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
• Lincoln Mark LT

This part is a component within the main shifter assembly, commonly identified as Ford P/N FL1Z-7210-BA.

(Printing Recommendations)

• File Format: .STL
• Material: ABS is highly recommended for its strength and heat resistance. PETG may also work. PLA is not recommended for in-car applications due to its lower melting temperature.
• Infill: 50% or higher for strength.
• Supports: May be needed depending on your printer's orientation.