Search models, users, collections, and posts

Segway Navimow i105E Traction Aid for Robotic Lawnmower

Thomas
Household>Garden
IP Report

Print Profile(2)

All
P1S
P1P
X1 Carbon
A1
X1E
H2D
X1
H2D Pro
H2S
P2S
H2C
X2D
A2L
A1 mini
0.2mm layer, 2 walls, 40% infill
0.2mm layer, 2 walls, 40% infill
Designer
1.1 h
1 plate
4.9(15)
A1 Mini 0.2mm layer, 2 walls, 40% infill
A1 Mini 0.2mm layer, 2 walls, 40% infill
1.2 h
2 plates
5.0(1)
Open in Bambu Studio
Boost
90
328
23
15
387
257
Released 

Bill of Materials

List other parts
  • fischer PowerFast II CTF 3,0 x 16, Spanplattenschraube x 8:

Description

Content has been automatically translated.
Show original

This spike ring is an accessory for the Segway Navimow i105E robotic lawnmower and serves to improve traction on soft, wet, or uneven surfaces. The 25 robust, evenly distributed spikes increase the grip of the drive wheels, leading to better movement, especially on damp lawns or inclines.

 

The model is optimized for 3D printing and is designed for easy attachment to the Navimow's existing wheel structure. The spike rings can be securely mounted on the wheel with commercially available Fischer PowerFast II CTF 3.0 x 16 chipboard screws. Matching drill holes are integrated, precisely aligned with the screws, ensuring a stable and lasting connection.

 

Features:

Compatible with: Segway Navimow i105E

Number of Spikes: 25

Fastening: 8 screw holes for Fischer PowerFast II CTF 3.0 x 16 chipboard screws

Recommended Material: PETG (alternatively ASA for increased weather resistance)

 

Notes:

Before installation, thoroughly clean the original wheels to ensure optimal adhesion of the screws.

Do not overtighten the screws to avoid material stress.

For even better grip, double-sided adhesive tape can be used between the wheel and the spike ring.

Boost Me (for free)

I am very happy about your boost!

rasen
navimow
i105e

Comment & Rating (23)

(0/1000)
@user_2008931404
Boosted
Print Profile
0.2mm layer, 2 walls, 40% infill
The rings are easy to print and quick to finish The result turned out very well Thanks for the design Aligning them on the mower (105i) was not that easy as there is no mark or groove or similar to center them – I would find this very helpful The first mowing was already a success How long the rings will last remains to be seen as the mower also has to drive over paths On stone, the wheels now sometimes slip a little
The profile uploader has replied
Show original
profile
4
Reply
@Thomas1806
Danke für das Feedback!
0
Reply
@Dada007
Boosted
Print Profile
0.2mm layer, 2 walls, 40% infill
Thank you! I couldn’t get to this part of the grass on a dry day, but now it goes up and in the rain. I have a Segway Navimow i105n
profile
4
Reply
@user_1483506038
Printed two pairs of these in PETG and just wanted to ask, these literally just screw into the existing wheel? Did you drill any pilot holes into the wheel beforehand or just screw it right in? I planned on using two of these on each side with them a little offset from each other for a little extra wideness and grip.
The designer has replied
4
Reply
@Thomas1806
I just started screwing it together :)
Show original
0
Reply
@raatemsholosti
Boosted
Print Profile
0.2mm layer, 2 walls, 40% infill
profile
2
Reply
@Mwester
Print Profile
0.2mm layer, 2 walls, 40% infill
profile
2
Reply
@user_332018299
Print Profile
0.2mm layer, 2 walls, 40% infill
0
Reply
@user_1009508525
Print Profile
0.2mm layer, 2 walls, 40% infill
0
Reply
@user_1688204325
Print Profile
A1 Mini 0.2mm layer, 2 walls, 40% infill
Fresh off the printer! The details on this model are insane!
1
Reply
@KidbuufrmdaO
Print Profile
0.2mm layer, 2 walls, 40% infill
awesome
profile
1
Reply
@Daniel2202
Print Profile
0.2mm layer, 2 walls, 40% infill
Funktionieren gut
profile
1
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Bumper / Kantenschutz für navimow i105e und i108e
Bumper / Kantenschutz für navimow i105e und i108e
mahluni
1.7 k
232
Segway Navimow Antenna wall mount
Segway Navimow Antenna wall mount
OldAndGrumpy
793
94
Navimow i105E/108E Wall Mount GPS Antenne
Navimow i105E/108E Wall Mount GPS Antenne
MP3DNEC
1.4 k
141
Segway Navimow i105e Antenna Mount
Segway Navimow i105e Antenna Mount
MK_Printer
11
6