Notepad Desk Stand - Designed for Supernote Nomad

This is a simple, functional stand for a supernote nomad, a6/a5 notepad, small tablet or book.

As my first ever design, I wanted to keep it as simple as possible and make it a quick print, so I could iterate on it if it works. Since most of it will be covered when in use, I didn't need a particularly fancy design. This should also allow for a piece of leather or felt to be glued to the top and some feet to be attached later, and the simple shape should make it easy to add to.

I printed it with the PLA supplied with the P1S, with 15% infill and it is absolutely strong enough to hold the weight of a nomad, notepad or book, and I can rest my hand on the device/book while writing. It has a low profile lip at the bottom which holds it in place but is low enough so that you don't have to lean on it at all. PLA should be fine since there is no heat to worry about, though it'd also hold a tablet to could be printed in another material for more heat resistance.