nice print, didn’t figure out the filament switch for gasket so just made one separate 

speedyone66

0.1mm layer, 4 walls, 25% infill

Oh I should have explained it better. when you are in preview mode, drag the layer down to 840 and right click where I am in the pic below and click swap filament 

MeasureOnce

liked the print didnt quite understand switching to TPU in the print so i just made a gasket to go in the lid out of whiteTPU95

brother, I expect the same from you in cigarettes :)

notpa

printacs

turn on precise height, precise wall and 0.08mm layer height for best waterproofing

user_2578893836

user_4078944494

user_1716584179

user_1849678373

has anyone tried printing this in complete tpu?

Dra'Rakah

finkett2

cover

Image (66).jpeg

Image (67).jpeg

Image (68).jpeg

Image (69).jpeg

Screenshot 2025-04-17 102425.png

plate_1.png

2025-04-17_6644edea83f8e.jpg

wacqueza

PXL_20250421_214855103.MP.jpg

Print by object to save time and filament!

1 Plate, Multicolor, No Poop - 0.1mm, 4 walls, 25% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please boost if you like this model!</boostcontent></boostme>This model requires you to print with PLA (or PETG) and TPU. <h2>Swap to TPU at layer 840. </h2>IPX7 means that the container was tested and confirmed to be sealed after being submerged at a depth of 1 meter for 30 minutes. Before the test, water indicator strips were placed inside the container. The strips will turn from white to red when the presence of water is detected. As seen in the fourth image below, no water was detected inside the container after the test was completed.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001332674/design/2025-04-17_29265f856a32a.jpeg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001332674/design/2025-04-17_935e935d5c45e.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001332674/design/2025-04-17_65ff58f5b2533.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001332674/design/2025-04-17_58910da121099.jpeg"></figure>

Print Profile(2)

Description

Swap to TPU at layer 840.

Comment & Rating (26)

License