Mini Dream Ball
Print Profile(1)
Description
Boost Me (for free)
Thank you for boosting me to help me get filament
Please pay attention to the position of the small disc to prevent installation failure
A 24mm-25mm Pokeball model, with solid infill, few separate prints, compatible with my other treatment machine model. The model is split by color, some details are relatively small, and split printing is difficult. It is recommended to try only if you are confident in the accuracy of your machine. If you cannot print it no matter what, you can send me a private message, and I will try my best to modify a multi-color printing version or a hand-painted version.
This model is very small and requires a 0.2 nozzle to print. I haven't tried a 0.4 nozzle, please let me know if you have any problems. The assembly of the model is relatively delicate, and the printing tolerance of your printer needs to be paid special attention to. It is recommended not to change the direction and angle of the model at will, otherwise it may lead to printing failure. The assembly gap of the model is set to 0.2mm by default. If it feels too tight or too loose, you can fine-tune it in the precision dimension compensation. Be sure to pay attention to not setting it globally
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)