Speaker Adapter Ring for Hyundai i30, Hertz Mille - Free 3D Print Model

Search models, users, collections, and posts

Alex_Z_

Hobby & DIY>Vehicles

IP Report

Print Profile(1)

All

P1S

H2D

X1 Carbon

P1P

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 20% infill ABS

Designer

2.5 h

1 plate

4.9(11)

Open in Bambu Studio

Boost

155

187

Released

Description

Speaker Adapterring designed for Hyundai i30 Front and Back Speaker.

Use threaded m4 inserts for optimal strength:
https://www.ruthex.de/en/collections/gewindeeinsatze/products/ruthex-gewindeeinsatz-m4-50-stuck-rx-m4x8-1-messing-gewindebuchsen

Adapter was designed for Hertz MPX 165.3 and Hertz MP 165P.3 with 156mm hole Diameter, but should also work on other speakers

Should also fit:

Hyundai

Hyundai i30 (GD)F 3/2012 - 12/2016

Hyundai i30 (PD)iF+R 2017 - 2020

Hyundai ix35iF+R 2010 - 2015

Hyundai TucsonF+R 2010 - 2021

Kia

Kia OptimaF+R 2015 - 2019

Kia SportageF+R 2010 - 2021

Kia SoulR 2018 – 2021

Kia CarnivalF+R ab 2014

Kia NiroF+R ab 2019

Kia Xceed 21

Printed with Bambulab ABS

Comment & Rating (18)

@TheProjectWheel

Boosted

Printed these for a '25 Kia K5 and they were a perfect fit. Paired to some Rockford Fosgate's. One question though...where are the cutouts for the wires to pass through?

The designer has replied

@Alex_Z_

Hi, the recess is not necessary with original normal cable thickness because the sealing strip compensates for this. I made a mistake and therefore had to use different cables on one speaker. The 4 mm² cable shown here was so thick that I had to rework it with a file. However, a standard cable should work without any problems without a recess. I am happy to provide a model with a recess, but I thought that it was not really necessary and could be adjusted manually to the cable cross-Section

@user_2747263195

This is a KIA Sportage QL 2019 model. I printed it with PETG and it fit perfectly. The speaker I chose was Aiyma's 6.5-inch speaker, but the frame structure was slightly too wide, causing a minor issue with the adapter. I used the provided STEP file to slightly widen the opening, and now all issues are resolved. (Apologies for modifying the file arbitrarily) This was a great help to me. Thank you. :) note. There was no hole for the cable, so I drilled a 4mm hole to route the cable. This is for reference for others who print this. :)

Show original

@user_2747263195

Print Profile

0.2mm layer, 4 walls, 20% infill ABS

@TheProjectWheel

Boosted

Print Profile

0.2mm layer, 4 walls, 20% infill ABS

@pikatchum

Hello I'll try printing one for an Xceed 2019 I hope it works out 😂 thanks for sharing

Show original

@user_3412559509

past es auch auf denn kia Proceed FL?

The designer has replied

@Alex_Z_

I would contend, yes The speakers look very similar. It is best to remove the speaker and measure it again to be sure https://www.cartuning.at/kia-proceed-soundsystem-jbl-raus-power-klang-rein/

Show original

@user_305075087

These work for a Hyundai 2025 Palisade Calligraphy and with the holes match up perfectly for both the JBL Stadium 62CF components and JBL Stadium 62F coaxial speakers.

(Edited)