Phillies Spinning Rally Chain
Print Profile(1)
Bill of Materials
- SuperGlue x 1:
Description
Phillies Spinning Rally Chain
Cheer on the Phillies this season with a spinning rally chain!
This spinning rally chain uses a 608 Bearing to spin the baseball and super glue to hold it together. The chain is 32 links long (which fits a 5ft 10in person.. me!), but if you're looking for a smaller chain, 29-30 links would fit most youth.
I broke this project into 4 different files, but MakerWorld only lets you add one print profile :(.
Make sure you print each of the following files:
- Chain Links - 32x.3mf
- Base - Supports - Posts.3mf
- Baseball.3mf
- Skyline.3mf
Filament Used
Color | Type | Brand |
|---|---|---|
| Burgundy Red | PLA Pro | eleg oo |
| Light Blue | PLA Basic | eSUN |
| White | PLA | eleg oo |
| Black | PLA | eleg oo |
Building Your Chain
Side View
- Glue the bottom post and both supports to the base, let it dry.
- While step 1 is drying, take a 608 Bearing (8x22x7mm) and push it into the center of the baseball. It will be a tight fit and will take a bit of force to push it all the way in.
- Put the baseball on the bottom post
- Glue the top post to the back of the skyline, let it dry.
- Put a little bit of glue in the support holes on the back of the skyline part then place the part onto of the baseball. Be sure to press down on both supports to make sure they are firmly in place.
- Go cheer on the Phillies!
Let me know in the comments if you have any issues with printing or building this!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (77)