Side Number Clock

A clock with big numbers along the edges. There are 4 variations and 3 of them require supports to print, the supports go in the clock movement space.  The one variant with level numbers and no minute marks can be printed upside down with no supports.

I painted this with metallic acrylic paint. However, you can do a filament swap to get different color numbers and minute marks if you print one of the variants with raised numbers and the minute marks.

I liked the one with the numbers being raised above the middle the most and that is the one I printed and included pictures of.

The hole for the clock movement is 58 mm square which should be big enough to fit most common clock movements (they are generally in the 54 mm range).

The one I printed is an earlier version so it differs slightly from the pictured final version. The main visual difference is I decided I wanted the minute marks after printing it so I printed a face plate and glued it on. However, in the final version the minute marks are integrated. The other difference (not visible in the pictures) is there is a hole on the back that can be used to hang it.

You can get a clock movement from amazon with an assortment of hands (e.g. https://www.amazon.com/EMOON-Mechanism-Replacement-Operated-Movement/dp/B0BY4S9QHG) or use the BambuLab clock movement. (although the hands it comes with are pretty short)