I can make if you want. Let me know brother and thank you so much for the appreciation.

B4B3D

cool piece.  are the other section with Cherno and dynamo available?

Cane411

Goggles

0.08mm layer, 2 walls, 15% infill

Thanks for the rating. Hope your print came out as expected.

Damn, actually looks great in BnW. Thanks for sharing the pic.

Alex

Giving a 4 star for the intent and design (I can tell you spent time on it, and it’s dope as hell) but the filament used absolutely makes or breaks this print. It’s legible and clear enough but mine did not come out great. I’d really recommend people experiment with lithograph filaments for this if they want to get it right

Frankle Hartle

cover

WhatsApp Image 2025-03-08 at 14.15.15_2fee9201.jpg

plate_1.png

2025-03-08_2f96e6db15d37.png

Print at 15% - 20% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x76.5mm in size You may print at higher layer heights below the Min Depth of 0.08mm The Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:     PLA PolyLite Black Transmission Distance: 0.3     PLA BambuLab Basic Orange Transmission Distance: 7     PLA BambuLab Basic Yellow Transmission Distance: 6     PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions:     Start with Black     At layer #8 (0.72mm) swap to Orange     At layer #11 (0.96mm) swap to Yellow     At layer #14 (1.2mm) swap to White for the rest.

This is a fantasy of mine, to see Godzilla and Pacific Rim universe collide. I will make more of these and upload. Try other colour combinations that you would like and post as comments. Thanks.

Print Profile(1)

Description

Comment & Rating (9)

License

Related Models

Gojira x Pacific Rim

Print Profile(1)

Description

Comment & Rating (9)

License

Related Models