Simple Tape Rack Holder Organise for various roll - Free 3D Print Model

Search models, users, collections, and posts

KFD

Tools>Organizers

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.24mm layer, 2 walls, 15% infill

Designer

11.9 h

4 plates

4.8(48)

Open in Bambu Studio

Boost

414

1393

964

544

Released

Description

That is a simple to print and assembly (just push the parts in) Roller tape rack - Organiser .

I have also included a thicker middle part if you want to double the rack .
if you want to make a double rack just print the plates :
“Middle Parts” x2
“Back Plate” x2
“Middle part for Double Rack” x1

Enjoy !

Comment & Rating (60)

@Timbervolk

Print Profile

0.24mm layer, 2 walls, 15% infill

Nearly perfect, but the tabs on the "Bottom Part" required sanding to fit. Since all the other pieces snapped together flawlessly, I'd suggest adding a bit more clearance to those pieces, or adding a chamfer to the ends for a smooth fit.

The profile uploader has replied

@KFDesigns

yeah you know with the fitting is a bit complicated and have to do also with filament or the flow ratio .. for me for example all the parts fits nice , I just hit them a bit with the plastic hammer and all fit good together .. but maybe like you suggest a fillet or chamfer will help. Thanks for your feedback !!

(Edited)

@Timbervolk

Replying to @KFDesigns :

Yeah I tried a mallet but it was too stubborn haha. But seriously it's an awesome design, thanks for uploading!

@Kamaeleo

Boosted

Print Profile

0.24mm layer, 2 walls, 15% infill

Great! Unfortunately, the lower compartment is too small. Full rolls of tape do not fit in it. So it is only partially usable.

@user_560444062

Print Profile

0.24mm layer, 2 walls, 15% infill

A very helpful solution for tape storage!

@Mikraft2024

Print Profile

0.24mm layer, 2 walls, 15% infill

great design

@Uspescu

Boosted

Print Profile

0.24mm layer, 2 walls, 15% infill

turned out really well , thank you for the model

@MDT_DK

Boosted

Print Profile

0.24mm layer, 2 walls, 15% infill

Cool design.Just clicked together.

@user_4236142614

Print Profile

0.24mm layer, 2 walls, 15% infill

The print worked great and the parts fit perfectly Unfortunately, the lower compartment is too small. Full rolls of tape do not fit in it. So it is only partially usable

Show original

@NCGrimbo

Boosted

Print Profile

0.24mm layer, 2 walls, 15% infill

Very pleased with the results. I ended up gluing the tabs to make sure they weren't going to fail. There were a few I needed to trim to get them to fit, but that's to be expected. My only disappointment is that the lower shelf doesn't hold the large rolls of tape and I don't use many small rolls. This would have gotten a 5 star rating if the lower shelf would also hold the larger rolls.

@herrero_kragg

Print Profile

0.24mm layer, 2 walls, 15% infill

@saveliy54

Print Profile

0.24mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.