Lego Technic single-row brick (various)

Here you will find various 1-row clamp bricks with side holes for connecting Technic bricks compatible with standard plug systems. Due to various offsets in the CAD design, I achieved very good clamping performance for the corresponding axles using the stored profile on my printer with Bambu Lab PLA+

As with the original Technic bricks, the **studs are hollow**, and various accessories can also fit into them

**Simply inquire about other sizes or a version with normal studs (not hollow)**, or create them yourself using my OnShape design (see below)

The following standard sizes are included in the original profile:

x2, x3, x4, x6, x8, x10, x12, x14, x16

The following special sizes are included in the second profile:

x5, x7, x9, x11, x13, x15, x17, x18, x19, x20, x21, x22, x23, x24, x25, x26, x27, x28, x29, x30, x31, x32

**You can find more clamp bricks in my profile** - more will be added successively - if you need a specific brick, just message me

**The exact procedure for creating your own bricks using a configurable OnShape design (released for copying and adapting) can be found outlined in the documentation (pdf) for a baseplate attached to the project for the baseplates - however, the procedure for the bricks shown here is similar**