human size fairy/butterfly wing cosplay/decoration - Free 3D Print Model

Search models, users, collections, and posts

Lucci

Props & Cosplays>Costumes

IP Report

Print Profile(3)

All

P1S

H2S

H2D

X1 Carbon

X1E

H2D Pro

P1P

P2S

H2C

X2D

A2L

A1 mini

0.08mm layer, 2 walls, 20% infill

Designer

5.3 h

4 plates

4.3(3)

0.12mm layer, 4 walls, 15% infill

Designer

9 h

8 plates

4.5(2)

0.12mm layer, 4 walls, 15% infill

Designer

9 h

8 plates

4.0(1)

Open in Bambu Studio

Boost

257

796

236

109

Released

Description

This is a large fairy wing I created for cosplay/decoration. There is a left version and a right version. It is about 2.5 ft long. I plan on gluing a shiny mesh on the back for an iridescent effect. I'll hopefully be later designing a way to attach it to the back somehow.

I included a color coded assembly picture to help with putting it together. The plates are labeled with the color of the pieces that match the assembly photo. Make sure you remove all support structures before assembling the item because the clearances for the dowels are close. Make sure you do still super glue the pieces together to ensure structural integrity.

****Note: I have one white piece because I ran out of black PLA while I was printing this. I would suggest you print in all black lol.

Comment & Rating (16)

@audaz_lab

Boosted

Obrigado!

@PekerTux

do you have the file published for the base that you used

Show original

@audaz_lab

Boosted

Replying to @PekerTux :

I will look for it and reply here

Show original

@Pengforge

Print Profile

0.08mm layer, 2 walls, 20% infill

Printed with Flex PLA so they swing a bit more naturally. Great file and very sturdy too :) I constructed a holder out of thick metal wire to carry them comfortably

Show original

@user_58463635

Boosted

Print Profile

0.12mm layer, 4 walls, 15% infill

Print came out great just had to figure out how to connect them together for my daughter To wear to Renaissance Festival. I printed them in blue and she got Many compliments

@user_3771836669

How did you manage to make the wings wearable?

(Edited)

@eeezyy

There seems to be a problem with the model in plate 5. There are some missing holes. other than that, nice model :)

@user_857434570

Print Profile

0.08mm layer, 2 walls, 20% infill

@user_58463635

Boosted

Print Profile

0.12mm layer, 4 walls, 15% infill

@user_58463635

Boosted

Print Profile

0.08mm layer, 2 walls, 20% infill

Other Issues:edges were very choppy looking with final product

@carandash21

Print Profile

0.12mm layer, 4 walls, 15% infill

@Richgable

The print profile is no longer public

@Richgable

The print profile is no longer public

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.