I tried 3 times to print this from Bambu Studio 2.0.1.50 FAILING! The supports kept failing on the second level of octo-arms; I think this is a bug with Bambu Studio TREEs!

I changed a bunch of settings to help it print ok.

I moved the seams to the rear of the heads (it looks terrible if a seam end up in the front).
I added variable layer height to get a better-quality print for all the curved heads.
Changed the supports so it would print ok and other settings, then uploaded my print profile.

Printoid

PLA 0.2mm layer, 2 walls, 20% infill

thank you for fixing this. When I printed it, it printed no issue (a1) so I just uploaded the print profile. I'm going to print this profile now to see how it compares to my old one. Thank you!

Sdf56f

You're welcome!  I think it was an issue with the newer 2.0.1.50 version of Android Studio and how it handled tree support settings, at least for the Silk filament I was using.

Please let me know if my settings were any improvement.

Spoiledcoke

Would you please provide pictures as it stook to my plate good?

I’m sorry the problem was about my printer

then what was wrong with the model for a 2 star?

Rainy

Nima A

Fixed supports 2.x Studio , seam position, variable layers

it is poop it wont let me send hmmm explain that uh boi make better prints or i will sue u

Besterman

fidget 3D

user_1554721415

peepz

It is exactly what you are expecting and prints great. 

DeftPenguin

Chris D.

cover

OctoOctoRocktopus_1.jpg

OctoOctoRocktopus_2.jpg

OctoOctoRocktopus_3.jpg

plate_1.png

2025-02-16_8a45ce14d5568.jpg

<ul><li>0.2 layer height</li><li>Needs supports</li><li>Handsome</li></ul>

b646cc71-4a98-419a-9fbe-d32ce52312c3.jpg

The original Designers 3MF file was failing with Bambu Studio 2.0.1.50 !  I tried 3 times and noticed the Tree supports were bad! I think this is a bug in Bambu Studio 2.0.1.50.  I changed to standard supports and then I tuned a bunch of parameters to improve the support, so it won&#39;t fail. Perhaps the supports would be easier to remove if I increased the gap for the supports, but after 4 prints, it&#39;s good enough for now and will print successfully! I also moved the seams to the rear of the heads (looks a lot better without a seam on the front of the head). I also added variable layer heights for a better-quality printout. I printed this using Inland dual color Silk PLA on my X1C using the Textured PEI build plate; it looks nice now!

Thinkable

The Rocktopus (Dwayne "The Rock" Johnson)

Need more rock in your life? Now you have it!&nbsp;The Rocktopus has now been unbound from the depths of “2d” modeling and is now growing (does need supports)&nbsp;Its also a fun fidget&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Fuel the Rocktopus making!</boostcontent></boostme>

Print Profile(2)

Description

Comment & Rating (36)

This remix is based on

License

Related Models