BMP - X1 / P1 - CUSTOM TH. FR. COVER Model/Cover#2

HERE IS MY 2ND TOOL HEAD FRONT COVER DESIGN, BY BMP. I DECIDED TO UPLOAD THIS ONE FOR MORE OPTION'S FOR THOSE WHO WANT SOMETHING A LITTLE DIFFERENT THAN MY 1ST MODEL, THE CHEESE GREATER COVERS… ETC. THIS BMP COVER FOR THE X1 & P1 PRINTERS IS ROUGHLY 10.8-11 GRAMS WITH ALL SUPPORTS/WASTE MATERIAL REMOVED. NOTE- X6 ANTI VIBE WASHERS INCLUDED TO PREVENT THE COOLING FAN FROM RATTLING, ETC. LED HOUSING HAS BEEN TWEAKED TO ALLOW MUCH MORE LIGHT TO PASS THROUGH BOTH THE FRONT OF THE COVER AS WELL AS INSIDE, THE OPEN TOP DESIGN ALSO ALLOWS MORE LIGHT TO PASS THROUGH ON THE TOP. VERY NOTICIABLE DIFFERENCE IN PERFORMANCE OF THE LIGHT WITH INTEGRATED COOLING FAN PROTECTION AND MINIMAL SIDES. THE OPEN DESIGN PROVIDES MUCH BETTER VENTING/AIR CIRCULATION FOR THE FANS. THE AIRFLOW COMING FROM THE FLOW DUCT IS AUDIBLY LOUDER AND YOU CAN TELL BY FEEL THAT THE FLOW DUCT FAN IS PUSHING MORE AIR THEN THE STANDARD COVER. MY PRINTS ARE COMING OUT WAY BETTER QUALITY WISE AFTER TESTING WITH THE BMP COVER SO ITS DEFINATELY AN UPGRADE FROM THE STANDARD COVER. YOU WILL NOTICE THE WEIGHT SAVINGS EASILY WHEN WORKING WITH THIS COVER, COMPARING THE BMP COVER WITH A “G DUCT” TO A STANDARD COVER WITH THE SAME DUCT + A COOLING FAN DUST COVER, ETC, I CAN DEFINATELY FEEL THE DIFFERENCE, STANDARD COVER FULLY DRESSED FEELS ALMOST TWICE THE WEIGHT AS A FULLY DRESSED “BMP” COVER. MAKE THIS “BMP” COVER EVEN LIGHTER PRINTING WITH A HYBRID OF PETG-CF FOR THE BULK OF THE COVER & WHITE/LIGHTER COLOR IN PETG FOR LIGHT HOUSING ONLY*.

*NOTE - THERE ARE TWO PRINT PROFILES, ONE FOR PETG-CF+PETG = LIGHTER, AND ONE FOR JUST PETG = SLIGHTLY HEAVIER SO YOU CAN PICK WHAT YOU WANT TO PRINT.

 PLEASE RATE IF YOU PRINT, THE PRINT PROFILE HAS BEEN DIALED IN PERFECTLY FOR MY X1C SO LET ME KNOW HOW IT GOES! BEST REGARDS, BMP LLC!