Fyr'alath the Dreamrender

No luck getting your legendary axe to drop from Amirdrassil in Dragonflight, or just really love it? You can now have it in real life! (at half scale).

You can print with AMS for multicolor, or single color and paint it. A couple plates are 30+ hour print with the AMS, so it takes some time. You can somewhat see the black infill through the orange walls. Changed to 3 walls after my print, so that should hide a little bit better.

There is a hole through the handle that fits a 3/8" dowel 18" long to add support, but it is not necessary.

The threads fit very well, but the dovetail connections are a bit tight and take a bit time and well removed support interfaces. There are 3 printed pins to fasten the blades to the head and the 3rd part of the bigger blade to the rest of it.

The model measures about 28". I did this because splitting up and plating the 5' model I originally made to fit an A1 mini (all I have) was a pain. I have attached the full scale STL, F3D, 3MF files if anyone would be willing to plate it, and hopefully post it.

I have also attached a mini version at 9". Print both plates, then glue together.