print it on textured plate, as on a smooth plate sliding the two parts open is difficult, but the texture the surfaces get from the PEI plate is perfect.

excellent model

excellent details, even at the reduced size that I printed them.

slow print, but well worth it, and it is indeed very tactile. definitely a good fidgit toy.

printed perfectly

check the orientation before printing, as one flat side isn't flat, and on the edge as suggested by Bambu studio didn't print cleanly. with the correct orientation, it works well, very loud. oh, don't get tempted to use supports, as they get printed internal to the whistle, and affect the function

must keep an eye on the bin, as if it gets too full, it falls free, spilling the contents far and wide... ask me how I know.

excellent, especially as this takes not too long to print

A bit fiddly, but it works well

Very cool tiny toy, my kids love it, as do their friends. Printed out 6 now

An intermediate length would be appreciated

Had to do a fair amount of size adjusting and reprints on various parts, but it does now work well. It helps to remember that the two sides have threads that are reversed, so make sure you know which pieces have a righthand thread and which have a lefthand thread.

Very thin and flimsy, but they do work. The container for themjust printed out as 2 solid rods, no compartment to store anything

Excellent, printed in PLA+, one colour, and painted with acrylic paints

Excellent but the part of the barrel holding the trigger is fragile, ibroke 3 barrela in making my pair of pistols

Nice design, but internal dimensions approx 2mm too small for the standard paper wrapped blades to dispense

Good that yhe marking are embossed, so still visible with a single colour print

No issues with the print or quality, but in use the bottom of the spring works free, thus negating its effectiveness

Some supports failed, but the model still printed with the odd downward spikes missing, but you have to look hard to notice. The outer wing spikes broke off with the support, which is unfortunate, but it is an epic dragon.

Awesome. Did it as a single plate, and it automatically added in the 2 pauses needed to insert the 2 different sized allen keys during the print. Like magic